|
Post by Lyle on Aug 25, 2002 12:39:21 GMT -5
The Tech Message Board is the place to post questions regarding your various projects and to ask for assistance from other members. While most of the threads here will relate to our 4 wheel drive vehicles, the board isn't necessarily limited to our trail rigs, so, feel free to post any questions you have here to see if some of the other members might be able to help.
|
|
|
Post by toynrnd on Sept 5, 2002 22:18:23 GMT -5
Does anyone know if an '85 XJ front end will bolt into a TJ?
|
|
|
Post by Donny on Sept 6, 2002 8:21:06 GMT -5
I think it will, I looked at Erik Robins' '91 XJ and the attachments look the same. I'll take some measurements later today. Chris, please e-mail me, I can't get through with the e-mail I have for you.
Thanks, Donny
|
|
|
Post by Donny on Sept 6, 2002 9:26:14 GMT -5
Chris, Does this axle have a vacuum disconnect?
Donny
|
|
|
Post by Lyle on Sept 6, 2002 15:51:01 GMT -5
Chris, please e-mail me, I can't get through with the e-mail I have for you. Donny - Chris' email is toynrnd@cox.net. He might not be able to get back to you until Sunday though. Lyle
|
|
|
Post by BIG J on Sept 10, 2002 22:15:00 GMT -5
yes, the xj front end will fit into a tj. i should also be a disco axle.
BIG J
|
|
|
Post by jeeepxj on Sept 16, 2002 15:42:32 GMT -5
Hey Chris, why would you consider doing that ?? To get the gear ratio ?? The stock TJ front end is by far a stronger "unit" With BIGGER u-jointed shafts and all !!
craig
|
|
|
Post by toynrnd on Sept 16, 2002 21:15:38 GMT -5
Donny T was looking for a bolt in to his wrecked TJ front.
|
|