|
Post by joshbaker on Apr 22, 2009 11:29:11 GMT -5
ok since you guys want to make fun of my truck with a six foot bed i will be borowing a trailor form a good friend friday night and goinng to pick up the frame saturday morning. i will be leaving va beach if anybody wants to go check out the juck yard. Hey its free ride to a junk yard that has jeep parts. anyways just let me know
|
|
|
Post by What It Was on Apr 22, 2009 11:35:44 GMT -5
Chances are they'll bring the frame down and away from the other Jeep stuff... They did that with me and I convinced the guy to show me the Jeep "goods"... They definitely had a lot of goods... I haven't been there in years but they did say they get Jeep stuff in almost daily.
|
|
|
Post by joshbaker on Apr 23, 2009 14:46:33 GMT -5
ok ill have to take a look around anyways like i said if anybody wants to come
|
|
|
Post by CORE 4WD on Apr 25, 2009 11:34:49 GMT -5
I'm still curious what a "kina" is??
|
|
|
Post by 87B2XLT on Apr 25, 2009 21:34:21 GMT -5
It's proof that our education system is in the tank, Dave P Dave G
|
|
|
Post by joshbaker on Apr 27, 2009 16:49:50 GMT -5
Ok well i know know that traffic on a friday going from va beach to richmond is hirrible especialy when sombody hits the left guard rail right by the exit for williamsburg. The tunnel was only about a half hour back up but the thung at williamsburg was horrible. Anyways Bryan H. and I are going to hopefully by the end of the weekend have the tub off and the chassis i/e axles on the new frame and hopfully the engine/trans/transfer case atleast resting on the frame. I will keep you all updated.
|
|
|
Post by newt on Apr 27, 2009 17:27:36 GMT -5
Josh,
Just before you hit "Post Reply" hit the "Spell Check" button just to the right (between Preview and Reset). Then after correcting the spelling, read your post out-loud (slowly) and do what you can to make sure it is easily understandable. That way we can figure out what you're talking about, and do our best to help you out.
Best of luck with the frame replacement project.
Adam
|
|
|
Post by newt on Apr 27, 2009 17:36:29 GMT -5
For example the below may better capture the intent of your last post (and keep us from poking at you).
"OK, well now I know that traffic on a Friday going from VA Beach to Richmond is horrible, especially when somebody hits the left guard rail right by the exit for Williamsburg. The tunnel was only about a half hour back up, but the [glow=red,2,300]thung [/glow](I have no idea what you were aiming for with this one) at Williamsburg was horrible. Hopefully by the end of the weekend Bryan H. and I are going to have the tub off and the axles/engine/trans/transfer case at least resting on the new frame. I will keep you all updated."
|
|
|
Post by LILREDCJ6 on Apr 27, 2009 19:55:22 GMT -5
Thung=Thing
Adam is on roll tonight.
Good luck Josh
|
|
|
Post by 87B2XLT on Apr 27, 2009 21:03:33 GMT -5
Sadly enough, I can understand Josh's posts. After I turn my translator on Good luck on the repairs, Josh..... Dave G
|
|
|
Post by What It Was on Apr 27, 2009 21:18:49 GMT -5
Tough crowd tonight...
|
|
|
Post by joshbaker on Apr 28, 2009 18:55:07 GMT -5
you guys are funny lol but its ok i don't mind. Everybody at the shop is betting that i will never complete the project. I know its an undertaking but its not really going to be that bad. Bryan is going to be their and so ill get it done hopefully on time (by the weekend of the 15th of may it will be on the road again.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 28, 2009 19:33:03 GMT -5
So, I'm not sure why I'm asking, but what are plans for the frame preparation? You are going to acid wash it and lay some POR-15 down correct? Why you are there check all the welds and especially the rear crossmember and the rear area that rusted out on your old one. I went ahead and welded plates along the outside of mine on the rearward 3 ft or so.
|
|
|
Post by ex-tbd85hilux on Apr 29, 2009 0:07:35 GMT -5
Good luck on the refurb. It should be pretty straight forward to do. And don't let these people get to Ya (ya I said ya). They make the same mistakes as ya sometimes when they is excited! aight? ;D
Paul G.
|
|
|
Post by 87B2XLT on Apr 29, 2009 4:53:14 GMT -5
I still don't see the spell check button on the quick reply form, but I know if you use the reply icon and 'go advanced', it's there. Just had to share that, for whatever reason Dave G
|
|