Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 10, 2012 14:55:43 GMT -5
I thought you said you were working on a truck but I don't see one. ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 10, 2012 14:56:25 GMT -5
Yea, nice bumper!
|
|
necro
Trail Guide
Posts: 119
|
Post by necro on Oct 11, 2012 16:04:15 GMT -5
Sweet workshop, and I like the view of the back yard also!
|
|
|
Post by PaulC on Oct 11, 2012 19:18:50 GMT -5
Are you getting the decals modeled your girlfriend.
PaulC
|
|
|
Post by rswords on Oct 12, 2012 10:17:15 GMT -5
Lol I should
|
|
|
Post by rswords on Nov 26, 2013 19:20:04 GMT -5
|
|
|
Post by toynrnd on Nov 26, 2013 20:43:41 GMT -5
Ahh...the memories of Toyota frame repair...
|
|
|
Post by rswords on Nov 27, 2013 8:32:36 GMT -5
Yep. Best thing I've found is just cut it off.
|
|
|
Post by gte718p on Dec 23, 2013 22:26:57 GMT -5
Nice. I've been watching the build on pirate. Never paid attention to the fact you were local. Nice work
|
|
|
Post by rswords on Feb 3, 2014 20:37:43 GMT -5
Man its been a while since I updated this Testing the clearance Ride height-ish Full droop Full bump Flexed about 36" under front tire Also made a Baller on a budget Nitrogen Fill setup for sub $150. Works great! New 20CF tank off ebay $75 Used regulator off ebay $15 Aircraft tire chuck (no leak) $15 Hydro Hose from napa $35 Tank fill $15 That brings us to this weekend Spent some money and ordered a planetary reduction box from www.BehemothDrivetrain.com When the internal cage was installed we removed the rear body mounts. Listining to the cab bounce off the cage gets real old real quick so I whipped this up. Still need to add a gusset. Also did all the finish welding and finished the rear tube. I like the side profile but swap back and forth on the rear...
|
|
|
Post by rswords on Feb 14, 2014 17:03:59 GMT -5
|
|
|
Post by rswords on Feb 15, 2014 15:25:57 GMT -5
|
|
|
Post by rswords on Feb 16, 2014 16:42:16 GMT -5
Didn't do too much today. Did some more finish welding, the GF came out to help, she stripped the interior out of the truck again and then helped cut the factory seat mounts out. Then we started laying in the frame work for the seat mounts. She got a quick lesson in welding tacking the bars in before I full welded them. A quick video of her heavy ass tack. :laughing: VID_20140216_133444775.mp4 Video by RESWORDS | PhotobucketAnyhow, Got both bars in before time to go home. Heading out of town for the week to attend CDI school in Alabama so had to get home to pack.
|
|
|
Post by rswords on Mar 11, 2014 19:56:02 GMT -5
|
|
|
Post by rswords on Mar 15, 2014 19:13:02 GMT -5
|
|