|
Post by What It Was on Nov 5, 2011 21:41:58 GMT -5
I'm looking for somebody who knows how to set up gears that would be willing to show me... the axle is a HP D60 ratio is 5.38's.
Rich
|
|
|
Post by onzrocks on Nov 6, 2011 20:16:18 GMT -5
I just did the exact same setup, 5.38s in the Dana 60 I think I got from you. It was my first axle setup and it seemed to be okay, but I'm certainly no expert.... All I gotta say is the 14-bolt rear is WAY easier to setup! I have some setup bearings if you want to use them.
|
|
|
Post by What It Was on Nov 7, 2011 8:04:57 GMT -5
Yeah... I guess this will be my trial no error experience... lol. I find irony in this, I can machine gears but I am uncertain if I cn set them up properly... ahahaha
|
|
|
Post by BIG J on Nov 23, 2011 8:52:58 GMT -5
You still in OV? I can stop by one day and share my minimal experience.
|
|
|
Post by JeepCJ5 on Nov 23, 2011 12:10:00 GMT -5
Shouldn't take long.
|
|
|
Post by What It Was on Nov 23, 2011 15:00:22 GMT -5
I've been reading up on it... I think I'll just take a long weekend and the laptop go out into the garage and tinker until it's within specs.
|
|
|
Post by CORE 4WD on Nov 23, 2011 22:52:12 GMT -5
No voodoo involved, Rich. Just put it to spec. Move carrier shims around to get backlash in. Add/decrease pinion shims for depth/pattern. More or less. Don't forget about bearing preload so they don't burn up (too tight) or move around (too loose) Love that 14bolt rear! Hasn't flinched in 3 years!! ;D
[o======o]
|
|
|
Post by What It Was on Nov 24, 2011 18:01:16 GMT -5
Awesome, thanks man... I'm glad to hear that the 14 bolt is still kicking.
|
|