|
|
Post by CORE 4WD on Nov 15, 2005 8:51:41 GMT -5
The RTI ramp has been born. It's going to be 23 degrees and towable. Looking for a trailer axle in the 5' wide range, light duty (750 lbs.?) like the ones at Northern. No springs. Jay (Ruffrider) thanks for material contributions to get this project off the ground. Pun intended!  |
|
|
|
Post by KarlVP on Nov 15, 2005 10:49:56 GMT -5
Looks good! I will have to come out there and put you guys to shame!!!  |
|
|
|
Post by BESRK on Nov 15, 2005 11:53:50 GMT -5
I wanna test it out when you're done. I'll take a running start and see if I can do a complete barrel roll in the air and land back on all 4 tires.
Looks good so far.
|
|
|
|
Post by Jim63 on Nov 15, 2005 13:27:34 GMT -5
sweet!
|
|
|
|
Post by CORE 4WD on Nov 15, 2005 15:48:36 GMT -5
I wanna test it out when you're done. I'll take a running start and see if I can do a complete barrel roll in the air and land back on all 4 tires. Looks good so far. Eddie I would pay to see that! Even if you only landed on your side... ;D |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 15, 2005 17:14:42 GMT -5
Don't you need a new trans first?  ;D |
|
|
|
Post by Chele on Nov 15, 2005 18:53:56 GMT -5
Dave...excellent...when you said you were getting into Jeep mode you weren't kidding!!! Excellent!!
(and an OT note...this last weekend I had the guy out fixing my roof and I was painting and plastering...but should be good this next weekend.)
|
|
|
|
Post by CORE 4WD on Nov 15, 2005 19:35:53 GMT -5
Don't you need a new trans first? ;D I don't care who ya are-that thar was funny! ;D (sorry Eddie!) |
|
|
|
Post by BESRK on Nov 16, 2005 6:02:13 GMT -5
Don't you need a new trans first? ;D I don't care who ya are-that thar was funny! ;D (sorry Eddie!) Hehe... you guys suck. My Jeep is in the backyard with a cover on him.. looks like a body in the morgue. |
|
|
|
Post by JeepinGoose on Nov 16, 2005 16:23:13 GMT -5
I don't care who ya are-that thar was funny! ;D (sorry Eddie!) Hehe... you guys s**k. My Jeep is in the backyard with a cover on him.. looks like a body in the morgue. must be a big as* body bag!  |
|
|
|
Post by RuffRider on Nov 24, 2005 22:28:49 GMT -5
Dave, I'll call you saturday and you can get rest of metal to finish the job.
|
|
|
|
Post by CORE 4WD on Nov 25, 2005 7:26:09 GMT -5
Ok! Could use 2x3 or 2x4 (by 11' x 2 pieces) for base of ramp and whatever 2x2 you can spare for bracing. Let me know when I need to be there. Every little bit is appreciated...Billy and I will come down with his truck.
|
|
|
|
Post by RuffRider on Nov 25, 2005 16:54:19 GMT -5
okie-dokie... prolly be after lunch..
|
|
|
|
Post by CORE 4WD on Nov 25, 2005 17:25:55 GMT -5
Cool.
|
|
|
|
Post by sinwagon on Nov 27, 2005 11:05:40 GMT -5
make sure it is strong enough to hold my fullsize
|
|
