|
|
Post by stumper92 on Sept 10, 2013 10:15:50 GMT -5
With The Annual Trail Ride just over a week away, who's going to be turning wrenches this weekend to get their junk trail worthy?
|
|
|
|
Post by LILREDCJ6 on Sept 10, 2013 18:30:49 GMT -5
Just cleaning for me. I got the newly adjusted CJ6 ready to go.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2013 18:59:40 GMT -5
Did you get that rear pinion seal replaced?
Let's see pics of what you've been doing.
|
|
|
|
Post by LILREDCJ6 on Sept 10, 2013 19:09:27 GMT -5
That would mean i took pics of what happened.
Its a surprise for everyone when they actually see me going SLOW.
Oh and yes the seal is replaced.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2013 20:13:15 GMT -5
I did cut a knuckle changing out a drive today, does that count? Hopefully my trailer lights will work with John's 101A2.
|
|
|
|
Post by gte718p on Sept 10, 2013 20:20:58 GMT -5
Not going to make the annual, but I'm headed to big dogs this weekend. I've been working frantically to get the tow rig and trigger back together. Assuming nothing else goes wrong I'm down to trailer brakes, rigging a light for the trailer license plate, epoxying shaft on air shocks, and packing.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 11, 2013 7:23:15 GMT -5
I did cut a knuckle changing out a drive today, does that count? Hopefully my trailer lights will work with John's 101A2. I thought you were going to say you drug your knuckles on a driveway today. |
|
|
|
Post by stumper92 on Sept 11, 2013 8:41:18 GMT -5
I have a few "adjustments" to make on the Jeep, along with some organizing of gear, and I should be ready to go. If anyone wants to test any of their recent mods prior to next week, I should be home most of the day Saturday. You are welcome to come by and use the trails. Just give me a heads up.
|
|
|
|
Post by toynrnd on Sept 11, 2013 10:44:38 GMT -5
The GPW needs to have the motor installed, the transmission, transfer case, axles, and brakes gone through, the body sanded and painted, seat frames and pads purchased and installed, tires mounted on wheels, and the all the wiring reworked. Other than that, I'm ready to go.   |
|
|
|
Post by stumper92 on Sept 11, 2013 13:33:01 GMT -5
The GPW needs to have the motor installed, the transmission, transfer case, axles, and brakes gone through, the body sanded and painted, seat frames and pads purchased and installed, tires mounted on wheels, and the all the wiring reworked. Other than that, I'm ready to go. Ready by Sunday? |
|
